ABOUT THE PRODUCTS

 

HARNESSES 

Quality & Materials

The webbing and hardware we use is very high quality. We use webbing made out of polypropylene, it is very strong and resistent. Everything is also water resistant.

All products are carefully machine sewn by hand. We use an X-cross-stitch to make sure everything is produced for maximum durability. You won't see any seams ripping at all!

You have the option between plastic hardware and metal hardware. Metal hardware is much more durable than plastic for obvious reasons. But that doesn't mean the plastic hardware breaks easily. You can still choose plastic buckles for your normal wear. If you intend to use the harness for a more rough action, like hard und sudden pulls you should probably better choose the metal buckles.

The paw print is ingraved in our normal black plastic buckles and colored with waterproof acrylic color. It doesn't rub off on your fur or other things, it is safe for normal wear. Waterproof for normal fluids like water or sweat. But be careful with alcoholic spray, it can damage the acrylic color!

Product	Material	Thickness	Weight	Breaking strength
Silver metal buckle	aluminium alloy; nickel	4mm 0,15748"	64g
Black metal buckle	aluminium alloy; nickel	4mm 0,1575"	64g
Golden metal buckle	brass (*)	2mm 0,0787"	50g
(Tactial style) Silver metal buckle	zinc alloy	5mm 0,1968"	104g
(Tactial style) Black metal buckle	zinc alloy	5mm 0,1968"	104g
(Tactial style) Golden metal buckle	zinc alloy	5mm 0,1968"	104g
Black plastic buckle	polyethylene	4mm 0,1575"	18g
(Paw print) Black plastic buckle	polyethylene	4mm 0,1575"	18g
Colored plastic buckle	polyethylene	3mm 0,1181"	12g
Paw print/Symbol rings	stainless steel	75x75mm 3x3"	60g
Other silver hardware	stainless steel (O-rings, D-rings) zinc alloy (adjuster, clips)	-	-
Other black hardware	stainless steel (O-rings, D-rings) zinc alloy (adjuster, clips)	-	-
Other golden hardware	brass (*)	-	-

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

: It withstands extreme pulling.

: It can withstand some more rough pulling. Extreme and sudden pulling on a single part might break it.

: It can only withstand gentle pulling. Rough pulling on a single part can break it. Should only be used cosmetically.

(*): Due to it's natural charactaristic brass material will oxidate, therefore can change it's color and loose it's gloss over time. This is usually a very slow process and takes a very long time. Being in contact with water can weaken the material and will speed up that process. Always keep it dry and only store it when fully dry.

 

 

Material Extras

Paw Print Rings (Chest ring)

Symbol Rings (Chest ring)

 

Symbol Rings (Waist ring)

The rings are made out of stainless steel and they replace the ring on the chest (and on your back too if you want) and are available for most harness types. You can find them on the 'Extras' option on every product page it is available on!

 

Color options

All of our webbing is 40mm (1 1/2'') wide and 1,4mm (0,055'') thick. For some colors there is a option for 1,8mm (0,07'') though. There is a significant difference between these two options.

The 1,4mm webbing is much more bendable and has a 'softer' feel to it. It is also very form fitting to the body. In comparison the 1,8mm webbing feels much stronger and looks more durable. On bare skin it can feel less comfortable though and it is not as form fitting to the body.

Both are good options, it mainly depends on your preference.

Choose between over 60 colors! Here is an overview of our options:

 

It fits everyone

Our harnesses are made to fit pretty much everyone. Almost every strap is adjustable by 20cm-30cm (8''-12'') which makes it easy to fit you in even with a padded fursuit.

There are 2 sizes to choose from. You can find the exact measurement infos on every product description page.

Here is where you should measure yourself: